Skip to main content

Manufacturing industry

Verlinde VT1 wire rope hoist maximises lifting height in a timber production facility

A specialist manufacturer of bespoke timber roof trusses and floor joists turned to Hoist UK, a long-standing and trusted Verlinde partner, for an overhead lifting solution in its newly constructed production facility. The customer needed an efficient and reliable crane system to support its manufacturing and material handling operations while maximising the available lifting height within the portal frame building. Hoist UK delivered a custom top-running overhead crane equipped with a low-headroom Verlinde VT1 wire rope hoist.

Industry
Timber and wood-product manufacturing
Location
United Kingdom
Products
Verlinde VT1 wire rope hoist

OVERVIEW AND CHALLENGE


The customer required an overhead crane to support general manufacturing and material handling operations in its newly constructed production facility. Hoist UK carried out a complete site survey and worked closely with the customer to determine the appropriate safe working load, crane span and structural arrangement.


Due to the building steelwork design, the crane span was influenced by the available height within the structure. Hoist UK provided technical support to ensure the crane configuration delivered the lifting height required whilst accommodating the building layout. Approval drawings were issued and agreed prior to manufacture.


The geometry of the portal frame building required the crane structure to be coordinated carefully with the existing steelwork to maximise lifting height within the available space. Stanchion positions were agreed with the customer to suit their machinery layout, resulting in 9.5 metre bays between runway centres. The gantry steelwork was designed to accommodate these bay dimensions. Clearances between the crane structure and the building frame were tight and were identified during the survey stage prior to installation. To reduce programme time, the bridge beam and associated crane components were delivered to site and assembled in position.


SOLUTION


Hoist UK manufactured the freestanding gantry steelwork in-house and supplied a top-running overhead crane complete with Verlinde VT1 wire rope hoist. The crane was specified with a 2,000 kg safe working load, a 6.5 metre bridge span and a total runway length of 21.4 metres. The gantry steelwork was manufactured to an overall height of approximately 4.3 metres, providing a lifting height of just over 4 metres within the portal frame building.


Whilst an electric chain hoist would normally be specified for a 2,000 kg rated capacity, Hoist UK selected a VT wire rope hoist with a low headroom trolley configuration to maximise available hook height within the building steelwork constraints and provide a robust lifting solution suited to the customer’s manufacturing environment.


Stanchions were fixed to the customer’s existing concrete floor using resin anchors in accordance with design requirements. The crane was supplied with radio control to allow wireless operation of all crane motions, together with a plug-in cabled pendant as a backup control method. A PEV load cell was also supplied, allowing loads to be weighed directly from the hook position when required. Following installation, the system underwent commissioning and proof load testing prior to handover.

Results and key benefits

  • Efficient lifting and material handling throughout the timber manufacturing facility.

  • A 2,000 kg top-running overhead crane equipped with Verlinde VT1 wire rope hoist.

  • Maximum use of the available lifting height through the low-headroom trolley configuration.

  • A custom freestanding gantry designed around the portal frame building and the customer’s machinery layout.

  • Radio control and a backup cabled pendant for flexible crane operation.

  • Direct load weighing from the hook using the integrated PEV load cell.

  • A fully commissioned and proof load-tested solution tailored to the customer’s production requirements.

Be the first to know.

Get Verlinde's latest product launches, certifications and industry news delivered directly to your inbox.

By subscribing, you agree to receive Verlinde news by email. Read our data protection policy.

Other case studies

See all case studies
Energy industry

Hoist UK installs a Verlinde-equipped crane for a refrigeration workshop

A refrigeration and electrical contractor turned to Hoist UK, a long-standing and trusted Verlinde partner, for an overhead lifting solution in its newly occupied fabrication workshop. The customer needed complete workshop coverage to support general fabrication and assembly activities while maintaining unrestricted forklift access beneath the crane structure. Hoist UK delivered a complete overhead lifting solution equipped with Verlinde VT2 wire rope hoist.

Manufacturing industry

SERE Maintenance equips Manitou Group’s new production unit with 15 overhead cranes

SERE Maintenance, designer and manufacturer of lifting equipment, handling systems and overhead cranes, equipped Manitou Group’s new rough-terrain aerial platform production unit in Candé with 15 custom-designed overhead cranes. A member of the EUROPONT and SAV Verlinde networks, SERE Maintenance adapted the lifting equipment to the factory’s dimensions, assembly lines and safety requirements

Pharmaceutical industry

BADT Levage supports pharmaceutical production expansion with a 3.2-ton overhead crane

BADT Levage installed a new 3.2-ton overhead crane for a customer specializing in pharmaceutical packaging, with whom it has worked for nearly 15 years. Equipped with a Verlinde Eurobloc VT electric wire rope hoist with reduced hook height, the tailored solution allows the customer to handle larger and heavier moulds while retaining its existing crane runway.

Let's find the right solution together.